CLICK&COOK FE506

• Before first use, clean all parts with hot soapy water (but not the engine block). Your bowl is equipped with a removable knife for easy cleaning (bowl and knife are not dishwasher safe).
• Make sure all packaging is removed before use.
• Place the seal on the gasket holder, then clip the set onto the lid (these three parts are already assembled when you unpack your product).
• Place the seal on the knife. Lock the set on the bottom of the bowl with the locking ring (these parts are already assembled when you unpack your product).
• Place the chosen accessory in the bowl:
- The accessory locks onto the knife.
- Place the steam basket inside the bowl, taking care beforehand to fill the bowl with 0.7L of liquid preparation (water, sauce...).
• Incorporate the ingredients inside the bowl or the steam basket.
• Place the lid on the bowl, lock the lid by turning it clockwise.
• Place the steam regulating cap on the lid.
• Place the bowl on the engine block until you hear a "click".
• Your appliance is equipped with a 0/1 switch, switch to position 1.

You can use the steamer basket to cook the food you want to keep in pieces.
Place the ultrablade knife in the bowl, add the ingredients you want to blend according to the recipe (carrots, potatoes, onion, ...) but make sure the vegetables at the bottom of the bowl do not obstruct fitting the steamer basket. Add the ingredients you wish to keep in pieces (bacon, chorizo, peas...) in the steamer basket. Add liquid to the bowl (water, stock,...) but without exceeding the maximum level.

You can use a baking paper which covers the bottom and the inner walls of the basket, to make recipes such as omelets, frittata, fish, white meats... with the steam program.

You can use a baking paper and cover the bottom and the inner walls of the basket to make recipes such as omelettes but also frittata, fish, white meat...
Use the "Steam cooking" program to cook this type of preparation.

We know that the respect of a certain global temperature is important in the realization of this type of recipe. For best results, we recommend using warm water and taking out your fresh ingredients in advance so that they are not too cold (butter, eggs, milk...).

Whether in automatic program or manual mode, you can stop the device at any time by pressing the "Stop" button. The programme is then in pause mode. You can restart it by pressing "Start" again. If you have made a mistake in programming and/or want to cancel, press and hold the "Stop" button for 2 seconds.

Whether in automatic program or manual mode, you can stop the device at any time by pressing the "Stop" button. The programme is then in pause mode. You can restart it by pressing "Start" again.
If you have made a mistake in programming and/or want to cancel, press and hold the "Stop" button for 2 seconds.

To remove the bowl from the base of the robot, take it by the handle and press the button on the front of the handle. You can then remove the bowl from its base.
The message "E3" appears on the screen.

To open the lid, the bowl must not be positioned on the motor block, hold the bowl by the handle, turn the lid counterclockwise with your thumb, grasp the lid handle and lift the lid up to open it.

Caution, if you have just cooked, first remove the lid cap to evacuate as much steam as possible through the central hole.

This is normal. Speed 0 has a pulsed operating mode, which causes the motor to run with on and off cycles.

You can increase the quantities by observing the maximum quantities listed in the instruction manual (see table in the "Initial use" section).
Be careful with automatic programs, especially the "Soup" program: if you exceed the 2L maximum level, there is a risk of splashing or overflowing hot soups.

Your device has 2 modes of operation.

• Automatic programme mode:
Speed, cooking temperature and time are pre-programmed. There are 5 automatic programmes available: Sauces, Soups, Stews, Steam, Pastry.

• Manual mode:
Personalized settings of speed, cooking temperature and time for use at your convenience.

Please refer to the table (§ Initial Use) in the user manual.

The whisk accessory must not be used to mix strong preparations (bread dough, shortcrust dough, etc.), and speed 4 must not be exceeded.

The blender accessory must not be used to mix strong preparations (bread dough, shortcrust dough, etc.), and speed 1 must not be exceeded.

Simply press the On/Off button on the right-hand side of the base.

1. On the screen, select "Auto" and press the programme of your choice.
2. The pre-programmed settings can be changed for a recipe (depending on the recipe chosen, the ingredients, the quantities prepared). You can change the speed, temperature, or cooking time by pressing the corresponding selector.
3. Adjust the parameter(s) on the screen by pressing the "+/-" button.
4. When you have finished changing all your settings, press the "Start" button.
5. When the programme is finished, the unit will beep 5 times.

1. On the screen, press directly on the selector representing the setting you have chosen to adjust, i.e. speed, temperature or cooking time.
2. Next, adjust the parameter(s) on the screen by pressing the "+/-" button. For safety reasons, it is not possible to adjust a temperature without setting a cooking time.
3. When you have finished adjusting all your settings, press the "Start" button.
4. When the programme is finished, the unit will beep 5 times.

In order to reduce discolouration, rub the stained areas with a cloth or a paper towel dipped in cooking oil, then clean as usual.
It is essential to clean immediately after use to avoid any staining.

To remove white traces or "rainbow" coloration from the bottom of the bowl, follow these 3 steps:
• Pour 10 cl of white vinegar into the bowl with the spindle and leave it for 1 hour.
• Empty the bowl and wipe the inside with a sponge.
• Rinse the bowl several times with clean water.

It is advisable to clean the tools immediately after staining appears, you can use lemon juice.
You can also leave the accessory in sunlight for a few hours.

Use a well wrung out sponge, then wipe with a dry cloth.
Warning: do not use the abrasive side of the sponge.

For hygiene reasons, it is advisable to dismantle the lid and clean the separate parts well with hot water and washing up liquid after each use.

1. Let it soak for 1 hour (water + dishwashing liquid).
2. Scrape off the deposit using a wooden spatula or spoon.
3. After emptying the bowl, scrub the bottom using the abrasive side of a sponge.
4. If there are still traces of the stain, scour with steel wool.

Instead of dishwashing liquid, you can also use lemon juice, white vinegar or a dishwashing tablet dissolved in water (leave to work as long as needed).

Process some lemons or use the steam program (Steam prog + 1L of water (34 oz) + 30 mins + a few drops of lemon juice).

To make cleaning easier, the lid set and accessories are dishwasher safe except for the bowl (B5) and the knife (B1).

For easy cleaning:
• Place the whisk in the empty bowl.
• Pour 0.5 L of water and a few drops of dishwashing liquid.
• Lock the lid with the cap.
• Start the robot on speed 4 at 80°C for 3 minutes.
• Finish cleaning under the tap.

For easy cleaning:
• Pour 0.5 L of water and a few drops of dishwashing liquid.
• Lock the lid with the cap.
• Start the robot on speed 7 at 80°C for 3 minutes.
• Finish cleaning under the tap.

It is advisable, as safety measure, to always keep the knife in the bowl when you don't use the robot (sharp blades).
Other accessories can be stored in a drawer or cupboard.

To clean your lid properly: remove the flexible part of the rigid ring and wash all parts separately.
Note: All parts of the lid are dishwasher safe.

To make cleaning easier, select the automatic "auto-clean" programme:
• Remove the • Pour in 0.7 litres of water and a drop of dishwashing liquid.
• Close the lid with the cap and press "Start".

After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

Try to position the appliance as close as possible to an air extractor (e.g.: cooker hood).
CAUTION: Do not place it on a heat source.

You can cool the bowl before making the recipe by crushing 10 ice cubes using "pulse" with the kneading/grinding blade, then empty the bowl, wipe it dry and immediately make the sorbet recipe.

The recipes were tested with ingredients at room temperature (20°C), It is possible that some recipes require 2 to 3 minutes of additional cooking if the ingredients (milk, eggs…) are from the refrigerator.

Check that you do not exceed the maximum quantities of ingredients specified in the instructions for use, and that you use the speed and accessory appropriate to your recipe.
If after these checks the problem persists, take your product to an authorized repairer.

Please take your product to an authorised repair centre.

• Make sure that the power cable is properly plugged into the mains supply.
• Check that the device is not in standby mode by pressing the "OK" button.
• Check that the On/Off switch on the base at the back is in the "I" position.

If the problem persists, take your device to an authorized repair centre.

Overheating safety feature has been triggered. Let it cool down for 30 minutes.
Before using again, reduce the amount of preparation to be mixed.

To whisk egg whites with your robot, you must use the lid without the cap.
Moreover, it is important that the bowl is completely clean with no traces of grease or oil.
WARNING: Do not exceed speed 4.

Yes, the "Sauce" program requires further mixing to preserve the preparation, prevent the formation of skin or sticking to the bottom of the bowl.

Yes, the heating resistor does not cover the entire surface of the bowl bottom.

Check that you have positioned the seal on the knife and that the locking ring is well tightened.
If after these checks the problem persists, take your product to an approved service centre.

Contact the After Sales Centre, indicating the error displayed.

The bowl is not on the motor block or it is incorrectly positioned on the engine block. The lid is not properly locked in place.
Remove the bowl from the motor block, properly lock the lid in place and put the assembled set back on the motor block.

Contact the After Sales Centre, indicating the error displayed.

Let the device cool down for 30min, then turn it off with the I/O switch.
Check the preparation, maybe some cooking juice is missing. Adjust the preparation and restart the recipe.

If the problem persists, return the appliance to the After Sales Centre indicating the error displayed.

You must always remove the bowl from the motor block to open the lid.

Contact the After Sales Centre, indicating the error displayed.

You have the following accessories with your appliance:

• Steam basket
The steam basket can be used to steam vegetables, fish or meat and to make soups with chunks.

• Mixer
It mixes cooked dishes without damaging the ingredients (browned dishes, stews, risottos, ratatouilles, chutneys and pulses).

• Whisk
It is used for mayonnaises, whipped creams, sauces, creams and dressings (mashed potatoes, polenta...), whisking egg whites.

• Ultrablade knife
It mixes (soups, fruit purees) and chops (vegetables, meat, fish).

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

Find more detailed information in the Guarantee section of this website.

If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.