Turbo Cuisine 5L, Multicooker, Fast Pressure Cooking

There is no standby mode on your product. To stop a program anytime during the cooking process, press the start / stop button for 3 seconds.
If you are not planning to use your appliance within the next hour, simply unplug it.

Wipe the bottom of the cooking bowl.
Make sure there is no food or liquid residue under the bowl or on the heating plate.

Then place the bowl into the appliance.

Never use the appliance without the cooking bowl.

Note: When using your appliance for the first time, the bowl may release a slight odour. This is normal.

This function is not available for all cooking modes or for all preparations.
This is intentional to prevent possible bacterial growth that is undesirable for your health.

• The filling level of the bowl must never exceed the MAX level.
• For food that may expand during cooking (rice, seeds, lentils, peas, etc.), do not fill the bowl beyond half its maximum capacity.
• The bowl should always be filled with a minimum of 200 ml of liquid.

! Don't put your hands near the steam exhaust!
It is possible that a slight flow of steam may escape from the back of the appliance during cooking.

• The required amount of water varies depending on the recipe and cooking time.
• Always use a minimum of 200 ml of liquid.
• Place the steam basket in the bowl and make sure that the food does not touch the lid.

! Do not put your hands near the steam exhaust!
It is possible that a slight flow of steam may escape from the back of the appliance during decompression phase.

The amount of ingredients should never exceed the MAX level. When you are cooking conventionally, the lid must always be open.

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

• Check that the silicone gasket is properly placed.
• Check that the lid is in proper position for closing (align the small arrow and lock the lid clockwise).
• Check for foreign bodies between the bowl and the heating plate. Remove the bowl and check that the heating plate, the central element and the underside of the bowl are clean. Also check that the central element can move freely.
• The bowl may be deformed (after an impact, fall...). The bowl must be changed at an authorised service centre.

• This is normal, the odour will disappear completely after a few uses.
• For a quick removal of the smell, you can put 0.5 liter of water, one cup of white vinegar and 2 slices of lemon in the cooking bowl, and launch a steam program for 10 minutes.
• Be sure to thoroughly clean the items listed in the instructions: cooking vessel, metal lid, before re-using your appliance.

• Check that there is no cooking in progress.
• Check that the pressure is fully released by pressing the pressure release button.
• Unplug the product and wait until it cools completely.

Make sure that the power cable is connected to both your device and the mains power supply.
If the problem persists, take your device to an authorized service centre.

• The silicone gasket in the lid is not in the proper position. In this case, let the appliance fully cool down, check the silicone gasket position, replace it properly if needed.
• The safety valve and pressure release valve may be clogged, or not in the proper position. In this case, let the appliance fully cool down, check the valves position and make sure they are clean, then replace it properly.
• If the problem persists after this check, take your product to an approved service centre.

If an error code appears (example: E0, E1, E2), you can refer to your product's manual for more information.

Check with the help of the user manual that all parts are securely placed (silicone gasket, safety valve and pressure release valve).

The lid is not in the proper position. According to the cooking program selected, the lid needs to be fully locked, closed but not locked, or fully opened. Please refer to your user manual to check which lid position is suitable for each cooking program.

1. Make sure that the power cable is connected to the power supply.
2. If the product is powered, unplug the power cord for 10 - 15 seconds and then plug it back in.

If the problem persists, contact our customer service or take your device to an approved service centre.

Take your device to a recycling center or waste disposal facility.

If you believe a part is missing, please contact our customer service center and we will help you find an appropriate solution.

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

Find more detailed information in the Guarantee section of this website.