TEFAL ULTRAGLISS 4 PROTECT

ULTRAGLISS 4 PROTECT Safe for all fabrics*. No setting needed, No burning. 

A worry free iron

Smart Protect lets you iron with total ease, no need to set the iron and no risk of burning clothes. Smart Technology ensures absolute safety for all ironable fabrics, with advanced features for a worry-free process and very good ironing results.

*Ironable fabrics

*Ironable fabrics

Essentials
  • Smart Technology for worry-free ironing

    Smart Technology provides one perfect combination of temperature and steam output for efficient ironing on all types of fabric*

  • Durilium® Technology Soleplate for Outstanding glide

    All soleplates are not the same. The Durilium technology invented by Tefal has been used by millions of consumers all over the world.
    For over 30 years, our soleplate has been acclaimed for its outstanding glide which provides fast and effortless ironing and for its excellent scratch resistance even when ironing harmful areas such as zippers.

  • Maximum steam distribution for efficient ironing

    The active steam holes at the tip, on the sides and, contrary to most competitors, at the center of the soleplate allow maximum steam distribution.

  • 2500W steam power

    High Power for fast heat up and powerful performance

  • Continuous steam output to ease crease removal

    Continuous steam output of up to 40 g/min gives you the ideal constant amount of steam to remove creases with ease.

  • Steam boost up to 150 g/min to remove even the toughest creases

    Use the steam boost to remove stubborn creases or to refresh your clothes with vertical steaming.

  • Eco Setting to save energy

    The Eco setting cuts energy use by 20%**

  • Anti-drip to keep the linen spotless

    The anti-drip function prevents water from dripping and staining your linen while ironing.

  • Smart auto-off for extra safety

    When accidently left unattended, the iron automatically turns off. If left on its heel, it will switch off in 8 minutes. If left on the soleplate or on the side, it takes 5 minutes before the iron shuts off.

  • Safe for all fabrics

    You can iron tough or delicate fabrics from linen to silk without burning your garment.

  • No setting needed

    The iron is pre-set on an optimal combination of temperature and steam, with no need to worry about how to set your iron.

  • Precision tip for convenient ironing

    The tip of the iron has a special shape that makes ironing around the buttons much easier.

Features
Power 2500  W
Continuous steam output 40  g/min
Steam boost 150  g/min
Vertical Steam    
Spray    
Setting of steam & temperature No setting needed  
Soleplate Technology Durilium Technology  
Glideability of soleplate ****  
Durability of soleplate / scratch resistance *****  
Precision Tip    
Continuous steam diffusion Tip, side and heart  
Ergonomic steam trigger    
Comfort Handle    
Stable rest hill    
Water tank capacity 270  ml
Water filling hole Extra Large  
Anti-drip    
Auto-Off    
Eco Mode    
Power cord length 2  m
Anti scale function Integrated anti-scale and Anti-scale setting  
Colours Ice White  
Guarantee 1 YEAR  

Instructions & Manual
Frequent questions

No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).


If your iron has an anti-calc system, you should clean the anti-calc valve once a month. To do this, unplug the iron and leave it to cool for 30-45 minutes. Empty the water and remove the valve, holding it by the top. Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve. the iron does not work without the anti-calc valve.


Gently shake your iron to reactivate it, the lights should start to flash and then the product should start to heat up.

The electronic system cuts the power and the auto-stop light flashes if the iron is not moved for more than 8 minutes (on its heel rest or base) or is left flat for more than 30 seconds. To turn the iron back on, gently shake it until the light goes out.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.