TEFAL PURE AIR CONNECT PT3080

PURE AIR CONNECT PT3080 Filters up to 100% of allergens*

Good-bye allergies, hello clean air! With Pure Air Genius you can finally breathe easy: the silent, eco-friendly air purifier by Rowenta filters up to 100% of allergens and fine particles*, for clean air in just 4 minutes** thanks to a high-performance filtration system that includes an Allergy+ filter. With a connected design for easy management from your smartphone as well as integrated pollution sensors, it automatically adapts to the air in your home for maximum filtration day or night.

Reference: PT3080F0

Tefal Pure Air Genius air purifier: Breathe easy!

Make allergies at home a thing of the past! With the Pure Air Genius air purifier by Tefal, you can breathe easy with the knowledge that the air in your home is safe, clean and allergen-free. Its four highly efficient filtration levels ensure it, filtering up to 100% of allergens and fine particles* including formaldehyde, pollen and pet hair, for clean air in just 4 minutes**. Its smart system detects air impurities via integrated particle & gas sensors, automatically adapting its filtration speed accordingly. Offering an eco-friendly design that consumes as little energy as an LED light bulb, this home air purifier is also ultra-silent on minimum speed, for undisturbed use. Rounding it all off is a connected design with a user-friendly app to visualize indoor and outdoor air-quality levels in real time, to track the amount of pollution captured, to control your purifier remotely and to create a personalized schedule. Plus, thanks to a partnership with prestigious Plume Labs, you can enjoy air-quality and pollens reports in real time for your very own city.

*In Speed 2 on birch allergen, external test realized in December 2019

**Calculated for a 10 m² room

Essentials
  • Filters up to 100% of allergens*

    Intelligently captures and eliminates up to 100% of allergy triggers for cleaner air, thanks to four highly efficient filtration levels: Pre-filter (hair and dust); Active Carbon filter (smoke, odors and VOCs); Allergy+ filter (removes allergens and fine particles that can be as fine a pollens, animal hairs, mites, mold, bacteria or viruses); and NanoCaptur+ filter (formaldehyde).

     

    *In Speed 2 on birch allergen, external test realized in December 2019

  • Filters up to 99,9% of airborne particles as small as viruses*

     

    *Tests carried out by external laboratory on H1N1 strain, on full appliance in maximum speed, 2020.

  • Ultra-fast air purification

    Enjoy clean air in just 4 minutes*, thanks to a high Clean Air Delivery Rate (CADR) of 350 m3/h.

     

    *Calculated for a 10 m² room

  • Smart, hassle-free filtration

    Detects, adjusts and destroys! Pure Air Genius sensors monitor air pollution levels in real time, automatically adjusting the filtration speed accordingly to capture and permanently destroy harmful pollutants.

  • Eco-friendly

    On minimum speed, Pure Air Genius consumes no more energy than an LED light bulb. Plus, thanks to its automatic speed adaptation, you can enjoy clean air all the time – without worrying about your electricity bill!

  • Ultra-silent

    Inaudible to humans at just 31d(b)a on minimum speed, for undisturbed use at any time.

  • User-friendly app and WiFi connectivity

    Visualize both indoor and outdoor air quality at a glance and in real time, track the amount of pollution captured, control your purifier remotely and create a personalized schedule.

  • Plume Labs air-quality forecasts

    Thanks to a partnership with Plume Labs, enjoy air-quality forecasts for your very own city, so you can plan ahead and limit your risk of allergic reactions.

Features
TECHNOLOGY
Type of products Air Purifier  
Type of technology Filtration  
NanoCaptur Technology    
PERFORMANCE
CADR smoke 350m3/h  
Number of speeds 5  
Sound Level min 31  dB(A)
Filtration levels 4 filtration levels  
Power max 50  W
OTHER FEATURES
Effective area up to 140m²  
Connected device (mobile application)    
Colours WHITE  
Additional included accessories Accessories : NC00150517 / NC00149537 Complementary accessories item : 1820000730 / 1820001099 /1820001101 /1820001408  
Number of filters 4  
INTELLIGENCE
Automatic mode    
Night mode    
Air Quality Indicator    
Sensors Particles + Gas  
Intelligence (auto mode)    
COMFORT IN USE
Control panel Electronical  
Timer 1-2-4-8  h
Delayed Start YES scheduling app  
Weekly program    
Filter change indicator    
Handle Integrated  
Child lock    
Type of plug EUR  
Sound Level max 52  dB(A)
Instructions & Manual
Frequent questions
You can go to the setting of your smartphone and check that your smartphone is connected to your home WiFi. Your home WiFi must have an internet connection.
In case your device has the WiFi function switched off, you need to activate it in order to broadcast the WiFi network called 'SEB_accessPoint'.

To activate the WiFi:
• Press the WiFi button for 3 seconds.
• You hear a beep and the WiFi button starts blinking quickly.

In case the product is in no-connect mode, you need to activate the WiFi mode:
• Press the child lock button and the WiFi button at the same time, if you hear a beep, then WiFi function is available.
• You can press the WiFi button to activate the broadcasting.
Yes, you can press both child lock and WiFi buttons to hear a beep. It will activate or deactivate the WiFi function.
You can re-do the pairing: in the app, go to My Profile > My appliance > Add a product. The whole pairing process will start.
Here is the list of the most common problems and solutions by the frequency order.

  1. Pairing succeeded but the appliance isn't connected: if you see in the app that your appliance isn't connected, close and reopen the app.
    If you still don't see the appliance after this action, unplug and replug the product.

  2. Wi-Fi connection: check the Wi-Fi password and type carefully.

  3. Keep your smartphone close to the appliance and the modem until the end of the pairing process.

  4. Access Point Android: make sure that you keep the connection to the appliance if you see a confirmation message. This message can appear twice during the pairing process.

  5. Access Point iOS: after several attempts, restart your smartphone.

  6. Access Point iOS: during the connection to the appliance, a popup will appear to ask you to connect to the "SEB_ACCESS_POINT" network. Press "Join".

  7. Access Point: when you activated the access point, did you hear a beep from the product? Is the Wi-Fi button flashing correctly?
    If not, try again.

  8. Access Point Android: after several attempts, remove the network "SEB_AccessPoint" from your smartphone setting if you see it.

  9. Access Point Android: some smartphones have an option in the Wi-Fi settings to avoid the connection to a Wi-Fi which has no internet connection.

    For the pairing, please deactivate this option so that the smartphone allows the connection to the appliance. This option is identified in Xiaomi smartphones such as Pocophone F1 and Redmi note 8.

  10. Internet connection: be sure that the appliance that you are about to pair does not need a proxy.

  11. Android: you must allow the geolocation.

  12. Internet connection: check that you select a 2,4 GHz network in your Wi-Fi setting, not 5 GHz to connect your appliance.

  13. Connection to the cloud: check if the automatic reconnection to your home Wi-Fi is correct.

  14. Connection to the cloud: activate the mobile data of your smartphone.

  15. After several attempts: restart the Wi-Fi modem.

  16. After several attempts: unplug, wait for 20 seconds, and re-plug the appliance.
    If the problem is still present, reset the appliance (hard reset).
In order for your smartphone to detect your WiFi around you, the application needs the location permission as required by Google. If you don't allow this permission, your smartphone won't be able to find your product, and not be able to continue the pairing.
This information will not be stored by Rowenta.
Your location permission can also be used to provide you the outdoor air quality and pollen information around you.
You need to go in your application settings to turn it on again and come back.
Follow the 2 instructions below:

1) Allow the location from the application settings:
• You need to press the button 'Go to settings' and activate it.

2) Activate the Google location in the global telephone settings:
• Go to the thelephone settings.
• Type "location" in the search, go to this section.
• Activate the location (ON).
• For those who have the option to choose the location method, select "High accuracy".

• Obtain accurate information on the air quality in your household as indicated by your Pure Air Genius.
• Get information on outdoor air quality, as well as the pollen information according to the location that you determine.
• Switch on/off your Pure Air Genius via the app: if you have an internet connection on your smartphone, you can control your product from anywhere.
• Create schedules for your Pure Air Genius.
• Check the filters' conditions. You will be informed when you need to change your filter, which you can buy online without losing time.
• Find out how much pollution, your Pure Air Genius has filtered in your home, by translating it into the corresponding number of cigarettes that you would have inhaled.
The home page is composed of 4 different parts:
  1. Outdoor information:
    The app provides you with the information about the outdoor air quality and the pollen of the chosen location: either you accept the geolocalization, or you select your city's name in the app.

  2. Indoor information:
    The app provides you with the real time information about the indoor air quality, coming directly from the Pure Air Genius.
    The product has a sensor which measures the air quality. It regularly sends the information to the app via Cloud.

  3. Remote control:
    You can turn the product on/off and change the power mode and the light mode using the buttons displayed in the app.

  4. Navigation bar:
    You can consult the following information from the navigation bar.
    • My Air: the main home page.
    • My Profile: to consult legal information, FAQs, after-sales information and change the settings of your account.
    • Scheduling: to set-up your purification routine according to your schedule.
    • Filters: to consult the state of the filter and also buy replacement filters online.
    • More information: to visualize the pollution captured by the product and learn more about the different sources of pollution.

home page of Pure Air app
Indoor air quality informations are located at the center of app homepage. The data comes directly from the particles and gas sensor.
home page of Pure Air app

The indoor air quality is divided into two part:
  • Particles & allergens
  • Gas & VOC (volatile organic compounds)

The numerical figures correspond to the air quality index (AQI) which can be described as the concentration of polluant in the ambient air.

The cercle is divided into five part and get a level of color going from lowest to highest level of pollution. The colors of the cercle follow the same principal of LED lights coloration.
Indoor air quality page of Pure Air app
The outdoor air quality information are located at the top of app homepage. It describes the air quality of city location and the level pollen present in your city location.


The outdoor air quality contains all the informations about outdoor particles & allergens, Gas & VOC (volatile organic compounds), and pollens.

  • Particles & Allergens: this part shows information about the Particulate Matters (PM2.5 & PM10).

  • Gas & VOC: it summarizes the level of pollution based on Nitrogen dioxide (NO2) and Ozone (O3).

  • Pollens: this complies all the informations about 4 types of pollens such as birch, grass, olive and ragweed.
    "NAB" means "National Allergy Bureau", it's the most recognized scale to express the level of pollen in the world.


The numerical figures correspond to the air quality index (AQI) which can be described as the concentration of polluant in the ambient air.

The cercle is divided into five part and get a level of color going from lowest to highest level of pollution. The colors of the cercle follow the same principal of LED lights coloration.
The app is no longer compatible on Android versions 4.4.4 or lower, because of reinforced data security.

As far as possible, we recommend that you update your device to a higher Android version or use another compatible device.

Updates will not only allow you to enjoy a richer experience with new features and compatibility with the latest technology, but will also protect you against possible security vulnerabilities that have been fixed in the latest versions.
Yes, you can. New user will need to download the Pure Air app. After that you have paired the product to the home WiFi, new user can also pair the product by following the instruction on the app. The pairing process shall be shortened as the product is already connected to the home WiFi.
You can unpair the appliance by one of the 2 methods:
• Delete the appliance via the app.
• Hard reset on the appliance.
The 3 LED lights will indicate the air quality level according to five colors:
Remember to connect the power cord plug to an electrical outlet that provides an appropriate voltage, then press the on/off button and select the required function.
Select the appropriate operating mode.
Check the frequency of cleaning and changing filters. If necessary, clean/change filters.
Before performing any maintenance work, switch off the air purifier using the on/off button (1).
Use a damp cloth to clean the surface of the product.

The filter replacement indicator (7) will turn on when the filters need to be replaced and you will receive a notification on your mobile application.

When the filter replacement indicator (7) turns on, please check on the mobile application in order to know which filter has to be replaced. If two filters must be changed, please change them one by one. Change the second filter only after changing the first one and after resetting the first filter.


Frequency of cleaning/replacing the filters:


These figures are based on tests in which the air purifier is used for 8 hours per day in quiet mode. You may need to replace the filters more often depending on the air quality and how often the air purifier is used.
The pre-filter is the only filter which can be cleaned with water and re-used.
The "2in1 Active Carbon & Allergy+" and the "NanoCaptur+" filters cannot be cleaned and re-used, so never wash with water. They must be replaced at the end of their lifespan.
Perform a force reset.
If you replace a filter before the end of its lifespan, press the mode button (2) for 3 seconds to reset the filter settings.
Make sure you turn off and unplug the appliance before cleaning the pollution sensors and follow the recommendations below:

1. Clean the air inlet and outlet using a soft brush or cloth.
2. Open the sensor cover located on the left hand side of the appliance.
3. Lightly wet a cotton swab and remove any dust from the lens and the inlet/outlet. Wipe dry using a dry cotton swab.
4. Clean the sensor using a soft brush or vacuum cleaner.



IMPORTANT:
Never use a detergent or metal object to clean the sensors.
The efficiency of the sensors may be reduced if not cleaned regularly.
Cleaning frequency varies depending on the operating environment of the appliance. If it is used in a dusty environment, clean the sensors more frequently.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
If the time slot is earlier than current time, by default the product will start next day.
Please check the following elements:

1) 5 GHz?
Your smartphone might use 5 GHz network and the product cannot detect it.
Solution:
Your smartphone can stay on the 5GHz network, but the product must be connected to a 2,4 GHz network. Therefore, you select here a 2,4 GHz network for the product. The pairing will work even you will get back to the 5 GHz network.

Note:
- Please check that your internet modem is either 2,4 GHz or a dual band router that is configured to support 2,4 GHz. The product does not support the 5 GHz band.
- How to determine if your router supports the 2,4 GHz band, 5 GHz or both? Sometimes when the dual band is available, there are 2 different networks and they are indicated with names such as 'mynetwork24', 'mynetwork24GHz' or 'mynetwork2-4'.


2) Hidden SSID?
If your network is 'hidden', then you can type manually the SSID (network name) by pressing "Enter SSID".
Please verify the following:
• Is your smartphone close enough to your product? If it is too far, your smartphone won't detect the broadcasting of the product Wi-Fi.
• Have you pressed the Wi-Fi button? The Wi-Fi access point stops broadcasting after a few minutes.
• Is the Wi-Fi button blinking? If not, please press again for 3 seconds to the Wi-Fi.
• Please try again the pairing process.

If you have checked the list above and you are still blocked, please do the following (product hard reset):
1) While the product is switched on, press the "Mode" button and "Wi-Fi" button at the same time. You should hear a beep and the product is switched off automatically.
2) Unplug the product, wait for 1 minute, and re-plug the product.
3) Switch on the product and press the Wi-Fi button to broadcast the access point.
4) Go to the setting of the telephone and confirm that you see the Wi-Fi network called 'SEB_accessPoint' (screenshot below).
5) Select the 'SEB_accessPoint' network.
• If your telephone gets connected automatically, please 'remove' this network from the pre-registered Wi-Fi list. After this operation, please verify that this 'SEB_accessPoint' is still present in the Wi-Fi list of your telephone.
• If your telephone asks you a password, then please cancel it. It's a good sign, it means that the application will be able to handle this part.
6) Go back to the app and start again the pairing process.



Note 1: For certain smartphones, after it is connected to the product Wi-Fi ('SEB_accessPoint'), you may see a message asking you to confirm if you want to stay on this network which has no internet connection. At this point, this behavior is normal, because you are connected to the product, which has no internet connection. It will be restored once the product has joined your home Wi-Fi. Therefore, please reply to this question so that you stay connected to this network.

Note 2: If you have a smartphone who has an option of the Wi-Fi assistant "switch between Wi-Fi networks and mobile data when Wi-Fi connection is poor" (such as Xiaomi), please deactivate it. If it is activated when your smartphone is connected to the appliance as an access point, the smartphone will detect that there no internet with this access point (which is normal at this step of the pairing). The smartphone will find another network for you and the application cannot go any further in the pairing process.
Check if the product WiFi button is lighted permanently or flashing.
If lighted permanently, it means that the product is correctly connected to your home WiFi, but the Cloud could not associate it with your account. Please try again later.

If still flashing, it means that the product isn't connected to your home WiFi. In this case please check the following elements:

Internet Connection:
- Your Home WiFi has an internet connection?
- If your home WiFi needs a proxy to access internet, the pairing will not work.

WiFi:
- Did you select the correct home WiFi?
- Did you type correctly the home WiFi password? (The maximum length of home Wi-Fi password: 64 characters).
- The SSID that you have typed is incorrect?
- Did you manually enter the WiFi name who has the 5GHz? The product is compatible with 2.4 GHz, not 5GHz.
- Your telephone isn't too far from the home WiFi/product?
- The product isn't too far from the home WiFi/telephone?
- It can be a compatibility issue: please check our list.


If you checked all these elements, and the pairing still does not work, please contact the After Sales service.
Please check the internet connection of your home WiFi. If there is no problem with the internet connection, please unplug the product, and re-plug after 1 minute of waiting.
The sensor lens might be covered with dust. If it is the case, clean the sensor lens.
Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.