ROBOT EXPLORER SERIE 60The thinnest 4-in-1 robot (*)
With the Tefal Explorer 60 robot vacuum cleaner, clean your home and tackle dust allergens without lifting a finger! Its two lateral brushes reach all corners and optimize surface coverage. Its Turbo Brush, an active motorized central brush, catches all wastes on its way. Plus, its Aqua Force system mops your floor while vacuuming that ensures visibly perfect results! Its high performance filter ensures 99,9 % of dust containment. The thinnest 4-in-1 robot* vacuum on the market at only 6 cm high, it even passes under low furniture. Its methodical navigation system, Smart Exploration 4.0, covers your whole home with outstanding accuracy. Finally, it's highly intuitive and easy to use: simply connect to the app and command your robot from anywhere, at any time.
Tefal Explorer 60 : the XS robot to fight against dust allergens
Clean your home and tackle dust allergens without lifting a finger, thanks to the Tefal Explorer Serie 60 robot vacuum cleaner! Its two lateral brushes reach all corners and optimize surface coverage. Its Turbo Brush, an active motorized central brush, catches all wastes on its way. Plus, its Aqua Force system mops your floor while vacuuming that provides a final touch for visibly clean results. Its high performance filter ensures 99,9 % of dust containment for maximum comfort. The thinnest 4-in-1 robot* vacuum on the market at only 6 cm high, it even passes under low furniture to pick up dust allergens. Its methodic navigation system, Smart Exploration 4.0, covers your whole home with outstanding accuracy and moves in a logical path, thanks to the integrated gyroscope. Unbelievably intelligent, this robot vacuum perfectly follows the path of your walls, thanks to the latest lateral technology sensors, and automatically adapts its efficiency according to your floor type, thanks to an ingenious rug-detection feature. Finally, it's highly intuitive and easy to use, helping your mind unwind, just like your body! Once connected to the app, simply schedule and personalize your cleaning from anywhere, at any time.
(*) sweeping, central brushing, vacuuming and mopping – compared to Top 15 best sellers Europe (14 countries) + Russia, independent panel 2019 data, value and volume sales.
Perfectly designed to fight against dust allergens;
• Aqua Force system: mops the floor while vacuuming to remove even the finest particles. The best way to save time and delegate more than ever! • High performance filter : ensures 99,9 % of dust containment for maximum comfort.
At only 6 cm high, it even passes under low furniture and hard-to-reach areas to pick up dust allergens with ease.
Intuitive solution to let your mind unwind;
A fully connected solution that takes the chore of cleaning off your hands, with auto-pairing to the free dedicated app for cleaning, scheduling and maintenance management at a tap from anywhere and at any time.
Smart Exploration 4.0 navigation system for optimal surface coverage.
A unique combination for a seamless, truly integrated smart navigation system: • gyroscope technology and infrared sensors to accurately cover your home, moving in a very logical path • the latest "time of flight" lateral camera technology to perfectly follow the path of your walls • an ingenious rug-detection feature to detect the floor type and automatically adapt its suction power for optimum efficiency.
Durable and robust
A high-performance lithium ion battery provides a running time of up to 90 minutes. Plus a durable design that's built for lasting high performance. 10-year reparability guaranteed.
3 cleaning modes
Methodical: smart navigation driven by the gyroscope, for a full coverage that doesn't miss a spot. Spot: spirals out from a starting point, perfect for cleaning a specific area. Wall Follow: specifically cleans along the walls and baseboards.
Visible results in every corner
Two lateral brushes to reach all corners and optimize surface coverage.
Please check the following elements: a) 5GHz network? Your smartphone might use 5 GHz network, and the produt cannot detect it. Solution: your smartphone can stay on the 5GHz network, but the product must be connected to 2.4GHz. Therefore, you should select here a 2.4GHz network for the product. The pairing will work even you will go back to the 5GHz network.
Make sure your wireless router is either 2.4GHz or a dual band router that is configured to support 2.4GHz. The product does not support the 5GHz band only.
b) Hidden network name? If your network is 'hidden', then you can type manually the SSID (network name) by pressing "Enter SSID".
Here is the list of the most common problems and solutions by the frequency order.
Pairing succeeded but the appliance isn't connected: if you see in the app that your appliance isn't connected, close and reopen the app.
If you still don't see the appliance after this action, - RR72xxx & RG72xxx products: put the robot out of its docking station and press the button 3 seconds. If you want to make another association with another phone, you may have to press the button several times to make it blink in orange. - RR74xxx & RG74xxx products: restart the robot by using the switch next to the dust bin. - RR77xxx products: restart the robot by using the switch below the robot.
Wi-Fi connection: check the Wi-Fi password and type carefully.
Keep your smartphone close to the appliance and the modem until the end of the pairing process.
Access Point Android: make sure that you keep the connection to the appliance if you see a confirmation message. This message can appear twice during the pairing process.
Access Point iOS: after several attempts, restart your smartphone.
Access Point iOS: during the connection to the appliance, a popup will appear to ask you to connect to the "SEB_ACCESS_POINT" network. Press "Join".
Access Point: when you activated the access point, - RR72xxx & RG72xxx products: does the LED flash orange + double beep? - RR74xxx & RG74xxx products: does the Wi-Fi light flash quickly + beep? - RR77xxx products: is the Wi-Fi light flashing?
If not, try again.
Access Point Android: after several attempts, remove the network "SEB_AccessPoint" from your smartphone setting if you see it.
Access Point Android: some smartphones have an option in the Wi-Fi settings to avoid the connection to a Wi-Fi which has no internet connection.
For the pairing, please deactivate this option so that the smartphone allows the connection to the appliance. This option is identified in Xiaomi smartphones such as Pocophone F1 and Redmi note 8.
Internet connection: be sure that the appliance that you are about to pair does not need a proxy.
Android: you must allow the geolocation.
Internet connection: check that you select a 2,4 GHz network in your Wi-Fi setting, not 5 GHz to connect your appliance.
Connection to the cloud: check if the automatic reconnection to your home Wi-Fi is correct.
Connection to the cloud: activate the mobile data of your smartphone.
After several attempts: restart the Wi-Fi modem.
After several attempts: unplug, wait for 20 seconds, and re-plug the appliance. If the problem is still present, reset the appliance (hard reset).
Several possible reasons exist: • You didn't enter the correct email address for the account. Please verify. • You didn't enter the correct password. To reset, request a temporary password by email and then change the password in the app's Menu.
Do not vacuum wet surfaces, any type of liquids, hot substances (embers, cigarettes), super fine substances (plaster, cement, ash, etc.), large sharp waste (glass), harmful products (solvents, abrasives, etc.), aggressive products (acids, cleaning products, etc.), inflammable and explosive products (oil or alcohol based).
Place the charging base station against a wall, on a flat surface and where the robot vacuum cleaner can easily find it. This location must be free of any obstacles (including rugs). Leave at least 1,5 metre of space free to the left and the right, and 2 metres at the front of the base station. If the station is placed in a corner or difficult to find, the robot vacuum cleaner will not be able to reach it. Place the base station's power cable along the wall. For more information, refer to the instructions in your user manual.
Yes, your robot vacuum cleaner is equipped with drop sensors that detect stairs and gaps. However, in some situations, the sensors are not as efficient. For example, curved staircase edges, rugs next to stairs, slippery surfaces and obstructions might affect the sensors' performance.
The robot vacuum cleaner Serie 60 has 3 cleaning modes: • "Methodic" (to clean all the accessible areas) • "Wall follow" (to clean along the walls and in the corners) • "Spot" (to clean a localised area)
To choose the "Methodic" mode, press once the power button on the robot. To choose the "Spot" mode, press twice the power button on the robot. To choose the "Wall follow" mode, press thrice the power button on the robot. You also can activate different cleaning modes in the mobile application.
Always keep the robot vacuum cleaner on the docking station, while you are not using it. If you plan not to use the robot for a long time, fully charge and then take the battery out of the robot (make sure the robot is switched off when you take the battery out). Store them in a cool dry place. Recharge the battery every 3 months.
Do not use any cleaning products to clean the robot vacuum cleaner. For some parts you can use the water, for the others you can use the dry cloth only. For more details, refer to the instruction manual.
You can perform the following checks: • Put the main power switch onto STOP and then onto START. • Unplug the cable and then plug it into the charging station again. • Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully. • Check to see if there is any obstacle such as a reflective object, a chair, etc. near the charging station.
If after these different checks, the automatic charging still does not work properly, have your robot vacuum cleaner checked by an approved vacuum repair company.
Several possible reasons exist: • If the robot did not start from its docking station, it will not return to it. In this case, the robot will return to its starting point. • If the robot vacuumed in Spot mode, the robot will return to its starting point. • If the robot is lifted up and put back down on the floor, it will try to relocate itself. If it can't, it will return to its starting point.
Check the following: • The charging station must not be installed on a rug. • The charging station must not be exposed to sunlight or near a heat source. • The free space to the side and the front of the charging station adheres to the instructions in the user manual. • The plug is correctly connected to the charging station. • The charger cable is connected to the power supply. • There are no obstructing objects around the charging base. • There are no objects near the charging station terminals. • The charging station is activated (LED indicator is green).
If after checking these elements, the robot still cannot find the base station, contact an approved vacuum repair company.
You can perform the following actions: • Turn off and then turn on the main power switch. • Unplug the cable and plug it again into the charging station. • Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully. • Check if there is no obstacle such as a reflective object, a chair, etc. near the charging station.
If after these steps, the automatic charging still does not work well, contact an approved vacuum repair company.
Check the following: • There are no obstucting objects under the wheels. • The robot is not blocked due to differences in the floor level. • There is no error message displayed. (see the troubleshooting and error codes section in your user manual)
You can perform the following actions: • Check if the intake channel is not obstructed. • Check if the dust bin is well fitted. • Empty the dust bin if it is full. • Remove the central brush and clean it. • Check if the filter is not saturated.
If after these steps, the problem persists, please contact an approved vacuum repair company.
The power-brush safety feature is activated when the robot identifies a risk.
Two situations may occur: • The power-brush gets stuck: the robot attempts to free it and stops the vacuuming and the power-brush. • The robot will try to free the brush: if it can't, it will turn off and you will have to clear it manually.
If the power-brush gets stuck in thick carpeting due to its long and/or thick fibers, or the robot has vacuumed the carpet for a long time, the power-brush will stop turning and the robot will continue vacuuming without it.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
This is normal, because you are connected to the product, which has no internet connection. For certain smartphones, after it is connected to the product Wi-Fi, you may see a message asking you to confirm that you want to stay on this network which has no internet connection. You have to answer that you want to connect to this network anyway for the association to be successful.
First, check if the robot is connected. If the Wi-Fi LED is blinking, the robot is trying to connect to the Wi-Fi network.
The LED is off: The robot is not connected. First, check your internet box.
The LED is blinking: The robot is trying to connect. Wait a few moments. If the robot is in this state for several minutes, restart the robot by putting it off its base and using the switch located near the dust bin.
The LED is lit and stable: The robot is connected. In this case, restart the robot by putting it off its base and using the switch located near the dust bin. If this does not work, use the reset procedure.
In order for your smartphone to detect your Wi-Fi around you, the application needs the location permission as required by Google. If you don't allow this permission, your smartphone won't be able to find your product, and not be able to continue the pairing. This information will not be used or stored.