ROBOT EXPLORER Serie 80 Vacuum CleanerThe smartest robot* for tailor-made cleaning
The Tefal Explorer Serie 80 Robot Vacuum Cleaner puts tailor-made cleaning performance within reach, for an easy-to-use automatic cleaning solution that leaves your entire home spotless. Discover the perfect automatic vacuum cleaner package: high-precision navigation, cutting-edge technology, and a highly intuitive user-friendly interface including smartphone app, adding an unprecedented level of quality to your personalized cleaning experience.
Bringing together advanced technology with user-friendly controls, the Tefal EXPLORER Serie 80 Robot Vacuum Cleaner is an expert cleaning solution that covers your entire home with total ease. Discover a go-anywhere automatic vacuum cleaner that delivers ultra-accurate navigation and personalized settings, saving time through an easy and intuitive user-friendly experience. Cutting-edge technology is matched by performance: the Aqua Force system mops the floor while vacuuming, an Animal Turbo Brush takes care of fur and animal mess, a high-performance filter is ideal for people who suffer from allergies, and so much more. Discover dependable deep-cleaning results made effortless with the Tefal Robots app (for iOS and Android) and automatic WiFi connectivity.
Easy tailor-made cleaning
Enhanced technology ensures ultra-accurate navigation, permanent mapping and personalized settings—for automatic cleaning that covers every inch of your home with total ease.
A robot vacuum cleaner enhanced with the Aqua Force system, taking cleaning one step further by mopping while vacuuming to remove fine particles.
Animal care feature
Designed to meet the needs of pet owners, the high-efficiency Animal Turbo Brush captures fur, hair and all kinds of animal mess.
A robot vacuum cleaner ideal for people who suffer from allergies, the high-performance filter offers a high level of air and dust separation.
The Tefal Robots app makes the robot vacuum cleaner experience easier and more intuitive than ever, with full compatibility on iOS and Android and a wide range of services (cleaning, scheduling, maintenance, and more).
Easy set-up and connections
Automatic WIFI connection offers a quick and painless set-up process, to get you started and cleaning in no time.
Clean into every last nook and cranny of your living space, across both hardwood floors and carpets, for versatile cleaning that covers every surface and terrain.
3 power modes (Eco, Standard, Boost) offer a device that couldn't be easier to use, for an automatic cleaning experience like no other.
Please check the following elements: a) 5GHz network? Your smartphone might use 5 GHz network, and the produt cannot detect it. Solution: your smartphone can stay on the 5GHz network, but the product must be connected to 2.4GHz. Therefore, you should select here a 2.4GHz network for the product. The pairing will work even you will go back to the 5GHz network.
Make sure your wireless router is either 2.4GHz or a dual band router that is configured to support 2.4GHz. The product does not support the 5GHz band only.
b) Hidden network name? If your network is 'hidden', then you can type manually the SSID (network name) by pressing "Enter SSID".
Do not vacuum wet surfaces, any type of liquids, hot substances (embers, cigarettes), super fine substances (plaster, cement, ash, etc.), large sharp waste (glass), harmful products (solvents, abrasives, etc.), aggressive products (acids, cleaning products, etc.), inflammable and explosive products (oil or alcohol based).
Place the charging base station against a wall, on a flat surface and where the robot vacuum cleaner can easily find it. This location must be free of any obstacles (including rugs). Leave at least 1,5 metre of space free to the left and the right, and 2 metres at the front of the base station. If the station is placed in a corner or difficult to find, the robot vacuum cleaner will not be able to reach it. Place the base station's power cable along the wall. For more information, refer to the instructions in your user manual.
Yes, your robot vacuum cleaner is equipped with drop sensors that detect stairs and gaps. However, in some situations, the sensors are not as efficient. For example, curved staircase edges, rugs next to stairs, slippery surfaces and obstructions might affect the sensors' performance.
The robot vacuum cleaner Serie 80 has 3 navigation modes: • "Permanent map" (to personalize your cleaning per room) • "No-go zones" (to define in which zone the robot shouldn't go) • "Spot" (to clean a localised area)
Always keep the robot vacuum cleaner on the docking station, while you are not using it. If you plan not to use the robot for a long time, fully charge and then take the battery out of the robot (make sure the robot is switched off when you take the battery out). Store them in a cool dry place. Recharge the battery every 3 months.
Do not use any cleaning products to clean the robot vacuum cleaner. For some parts you can use the water, for the others you can use the dry cloth only. For more details, refer to the instruction manual.
You can perform the following checks: • Put the main power switch onto STOP and then onto START. • Unplug the cable and then plug it into the charging station again. • Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully. • Check to see if there is any obstacle such as a reflective object, a chair, etc. near the charging station.
If after these different checks, the automatic charging still does not work properly, have your robot vacuum cleaner checked by an approved vacuum repair company.
Several possible reasons exist: • If the robot did not start from its docking station, it will not return to it. In this case, the robot will return to its starting point. • If the robot vacuumed in Spot mode, the robot will return to its starting point. • If the robot is lifted up and put back down on the floor, it will try to relocate itself. If it can't, it will return to its starting point.
Check the following: • The charging station must not be installed on a rug. • The charging station must not be exposed to sunlight or near a heat source. • The free space to the side and the front of the charging station adheres to the instructions in the user manual. • The plug is correctly connected to the charging station. • The charger cable is connected to the power supply. • There are no obstructing objects around the charging base. • There are no objects near the charging station terminals. • The charging station is activated (LED indicator is green).
If after checking these elements, the robot still cannot find the base station, contact an approved vacuum repair company.
You can perform the following actions: • Turn off and then turn on the main power switch. • Unplug the cable and plug it again into the charging station. • Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully. • Check if there is no obstacle such as a reflective object, a chair, etc. near the charging station.
If after these steps, the automatic charging still does not work well, contact an approved vacuum repair company.
Check the following: • There are no obstucting objects under the wheels. • The robot is not blocked due to differences in the floor level. • There is no error message displayed. (see the troubleshooting and error codes section in your user manual)
You can perform the following actions: • Check if the intake channel is not obstructed. • Check if the dust bin is well fitted. • Empty the dust bin if it is full. • Remove the central brush and clean it. • Check if the filter is not saturated.
If after these steps, the problem persists, please contact an approved vacuum repair company.
The power-brush safety feature is activated when the robot identifies a risk.
Two situations may occur: • The power-brush gets stuck: the robot attempts to free it and stops the vacuuming and the power-brush. • The robot will try to free the brush: if it can't, it will turn off and you will have to clear it manually.
If the power-brush gets stuck in thick carpeting due to its long and/or thick fibers, or the robot has vacuumed the carpet for a long time, the power-brush will stop turning and the robot will continue vacuuming without it.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
1. Check to see if your robot is properly connected to your wireless network (robot's Wi-Fi light on). If not, turn the robot off and then back on with the “ON/OFF” switch located under the robot while it's within range of your wireless network.
If the light is still off, this can be for several reasons: • The robot may be off or not have enough battery charge. • The robot is outside the range of your Wi-Fi network. • You changed the password for your Wi-Fi network. The robot is thus no longer connected to your Wi-Fi network. You must reboot your robot and then reconnect it. • The robot's internal software failed to update correctly. Follow the app's step-by-step instructions.
2. The robot's Wi-Fi light is on, but the app is not able to connect. Your smartphone is not connected to the Internet (Wi-Fi or 3G/4G network).