ATLANTIS All the comfort and style of glass, with an elegant design.
  • Family bathroom scales (4 user-profile memories).
  • The comfort and style of glass.
  • The Atlantis intelligent scales: memorise up to 4 user profiles!

    Track changes in your body mass thanks to the Tefal Atlantis bathroom scales and their programmable monitoring feature. Their elegant design, LCD display, automatic on/off, and 100% electronic technology have helped to make the Atlantis bathroom scales N°2 on the market!*

    • 4 memories, for all the family.
    • Easy-to-read LCD display (27mm digits).
    • Accurate to each 100g.
    • Automatic on/off.
    • Easy-to-clean, toughened-glass platform.
    • 100% electronic technology. Require 2 LRO3 batteries (not supplied)


    • 2100072084_B1.png

      4 memories

    • 2100072084_B2.png

      Automatic ON/OFF

    • 2100072084_B3.png

      weight difference

    Instructions & Manual
    Frequent questions
    It is important to always weigh yourself at the same time of day. The best frequency is once per week.
    This function allows an immediate weight display. It is not necessary to wait for the "0" to display - the weight calculation begins immediately.
    People who have a pacemaker can't use the appliance. The weight calculation will be distorted for people who have metallic implants (prosthesis, screw, plate…).
    Most of the recent bathroom scales have a switch on the battery location if not, look at the instruction manual.
    When you step on the scales, barefoot, an electric current of very low intensity is transmitted through the body via the electrodes. This current, which travels from one foot to the other, encounter difficulties when it has to pass through fat. This resistance of the body, called bioelectrical impedance, varies according to gender, age and height of the user, and makes it possible to determine body fat.
    This device is perfectly safe because it operates with a very low current (4 x 1.5 V batteries).
    To be fully satisfied with this appliance, measuring and weighing must always be conducted under the same conditions:
    • Always weigh yourself in bare feet. Your feet must be dry and properly positioned on the electrodes. Beware that if your feet have too much hard skin the measurement may be affected.
    • preferably once a week first thing in the morning,
    • 1/4 of an hour after waking up, so that the water in your body is distributed in the lower limbs.
    It is also important to ensure that there is no contact between the legs (thighs, knees, calves) or between the feet. If necessary, slip a sheet of paper between your legs.
    It depends on which type of scale you use:
    - Diagnostic scale: the measure will be distorted.
    - Other bathroom scale: no impact on the measurement.
    The appliance can be wiped with a sponge and washing-up liquid. Don't use a metallic scourer or scouring powder. Never immerse in water.
    Store your bathroom scale lying down without anything on it. If you'll not use it for a long time, remove the batteries.
    We recommend always using new alkaline batteries (LR03 batteries), and never using saline batteries (R03 batteries) or rechargeable batteries (HR03 batteries).
    When changing the batteries, always replace all batteries with new alkaline batteries.
    This does not apply to scales using CR2032 button batteries or lithium batteries.
    Yes, a diagnostic scale measures the lean body mass and by deducting it from the total body mass, gives the overall body fat regardless of where it is located.
    Yes, the garment weight is added to the fat mass.
    During the bathroom scale manufacturing calibration some variations could appeared from one scale to another. Some differences coming from these variations could appear if you compare your weight on two different bathroom scales.
    Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
    Please go to the “Accessories” section of the website to easily find whatever you need for your product.
    Find more detailed information in the Guarantee section of this website.
    It is normal for the "8888" message to be displayed when batteries are inserted. The product is in the initialisation phase. Place it on a flat surface and wait for the message to clear. Moving or stepping on it while “8888” is displayed will restart initialisation. Initialisation can take from 5 to 30 seconds.
    The scales have detected an anomaly whilst weighing and are recalibrating. You will need to step off the scales and wait for "0.0" to be displayed before stepping on again.
    The virtual keyboard is only activated once weighing is complete.
    Here are the rules to follow:
    • Step off the product once weighing is complete,
    • The product must remain on the ground when tapping the keys,
    • Only tap the keys with one finger,
    • Only use a finger to tap the keys (no objects).