Master Valet is a powerful garment steamer which removes creases and smoothes out clothing with a high degree of comfort and ease. The exclusive Roll & Press vertical support system provides a flat surface for the garment to be pressed up against, for an extremely quick and convenient process.
The patented Roll & Press vertical support provides a flat surface to press the garment and hold it in place when steaming. It frees one hand for more efficiency, comfort and freedom of movement.
Save time
No need to go to the dry cleaner. Saves time on linen care sessions with no need to set up an ironing board, and a fast heat-up time of 60 seconds.
High performance steaming sessions
The efficient 30g/min steam output through large steam head allows a great steam diffusion on the fibers to remove creases, refresh and sanitize fabrics.
Ease of use
The easy foot-operated on/off switch with light indicator allows for easier control. An XL 2.4-liter removable water tank of is easy to refill, with large wheels allowing for easy carry.
Designed for all kind of clothes
Ideal for suit, dress, shirt, pants and more, thanks to an integrated hanger on telescopic pole, hanger hook and pant clips.
Large set of accessories
Three accessories included.
Fabric brush opens weaves of the fabrics for better steam penetration, perfect on thick fabrics.
Lint pad removes hair, lint and animal fur for a perfect finish.
Steam bonnet provides even distribution of steam, filters water impurities and protects fabrics from water drips
Save money
Stop spending money on dry cleaning services. With Master Valet, get professional results at home.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The water level in the tank is too low ==> Unplug the appliance and fill the tank. The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump. The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product. The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre