Master Valet is a powerful garment steamer which removes creases and smoothes out clothing with a high degree of comfort and ease. The exclusive Roll & Press vertical support system provides a flat surface for the garment to be pressed up against, for an extremely quick and convenient process.
The patented Roll & Press vertical support provides a flat surface to press the garment and hold it in place when steaming. It frees one hand for more efficiency, comfort and freedom of movement.
High performance steaming sessions
The efficient 30g/min steam output through large steam head allows a great steam diffusion on the fibers to remove creases, refresh and sanitize fabrics.
Gain of time
Reduces linen care sessions length as no need to spend time on setting up an ironing board and fast heat up time as it is ready in 60 seconds.
Ease of use
The easy foot operated on/off switch with light indicator makes it easy to control. Its removable XL water tank of 2,4L is easy to refill. Its large wheels allow an easy transport.
Designed for all kind of clothes
It is adapted to suit, dress, shirt and pant (...) thanks to its integrated hanger on telescopic pole, hanger hook and pant clips.
Large set of accessories
3 accessories included:
Fabric brush: opens weaves of the fabrics for better steam penetration, perfect on thick fabrics
Lint pad: removes hair, lint and animal fur for a perfect finish
Steam bonnet: provides even distribution of steam, filters water impurities and protects fabrics from water drips
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The water level in the tank is too low ==> Unplug the appliance and fill the tank. The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump. The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product. The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre