TEFAL Intense Pure Air PU4025G0

*Tested in an external laboratory vs main competitive filtration technologies, November 2014.

Essentials

ULTIMATE PERFORMANCE AND LONG-LASTING EFFICIENCY
Permanently destroys formaldehyde*, the most harmful indoor air pollutant, thanks to the exclusive and patented NanoCaptur filter. Classical filtration technologies only trap and may release up to 100% formaldehyde after filter saturation.
High performance of filtration

Up to 99.97% of the finest particles filtered thanks to its 4 levels of filtration. Each level is dedicated to a specific kind of pollutants:
1- The pre-filter stops the bigger particles (dust, human and animal hair, etc.)
2- The Active Carbon filter catches odours, gas and Volatile Organic Compounds.
3- The HEPA filter captures up to 99.97% of the finest particles (mold, dust mites, pollen, fine particles - PM2.5, bacteria, virus, pet danders ...)
4- The exclusive and patented NanoCaptur filter permanently destroys formaldehyde, the most dangerous home pollutant.
Intelligent filtration

Intense Pure Air is equipped with two pollution sensors, a particle sensor and a gas sensor, which measure the amount of pollution in the home.
Depending on the level detected, the air quality indicator changes color and the filtration speed is automatically adjusted to ensure optimum air quality.
Quiet night

Product set on quietest speed (Speed 1).
Speed 2 as maximum filtration speed in case of pollution for quiet night.
Dim ambiant mood lighting.
Optimized air flow

Adjustable air outlet orientation for optimum performance and well-being:
45° orientation for optimized air circulation and pure air homogeneity in the room.
90° orientation for maximum comfort of use.
Extremely silent

Intense Pure Air is a high performance air purifier that remains extremely quiet.
It is only 22dB(A) at its lowest speed and 45dB(A) at maximum speed.**
Easy filter maintenance

"HEPA" and "ODOR" lights blink when the HEPA and Active Carbon filters need changing. These indicator lights take into account the real-time length of use of the air purifier, as well as the level of pollution in the room.

‹ ›

Features

‹	Intense Pure Air
Technology
Type of products	Air Purifier
Type of technology	Filtration
NanoCaptur technology
Ionization
Performance
Air flow	170 m3/h
CADR smoke	150 m3/h
Number of speeds	4
Sound Level	22-45** dB(A)
Disclaimer	* Surface areas calculation extrapolated from ANSI-AHAM AC-1-2006 standard ** Acoustic pressure level measured at a distance of 1m50 from the air purifier in a semi-anechoic chamber
Power max	30 W
Other features
Effective area	up to 35 m² *
Dimensions ( ...x...x...)	L30 X D28.5 X H54 cm
Weight	5.7 kg
Colours	WHITE / SILVER
Additional included accessories	Active Carbon Filter, Hepa Filter, NanoCaptur Filter
Intelligence
Automatic mode
Night mode
Air quality indicator
Sensors	Particles
Comfort in use
Control panel	Electronical
Timer	1 / 2 / 4 / 8 h
Delayed start	1 / 2 / 4 / 8 h
Filter change indicator
Adjustable grid
Ambient mood lighting
Handle	Integrated
	Buy online

Instructions & Manual

Frequent questions

How to better use my product

Where to install the appliance?

Place the purifier on a flat, stable surface in the room requiring treatment. To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance.

Maintenance and cleaning

How often do you have to clean/replace the filters?

• The pre-filter must be cleaned every 2 to 4 weeks.
• The active carbon filter must be replaced when the "Odor" indicator light lights up, otherwise at least every year.
• The HEPA filter must be replaced when the "HEPA" indicator light lights up, otherwise at least every 3 years.
• The NanoCaptur filter must be replaced according to the saturation indicator (refer to the colour chart on the filter); check the degree of saturation every 6 months.
Guidelines based on 8 hours of use per day at speed 2.

Technical support

What should I do if my appliance is not working?

After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre

What should I do if the power cord of my appliance is damaged?

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

The airflow is weaker than before.

Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.

A bad smell is coming out of the outlet.

Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.

The air output does not change automatically

Your appliance is in manual mode, select the correct operational function.

The colour of the air quality indicator does not change.

There may be several reasons:
• A layer of dust is covering the senor lense; clean the sensor lense.
• If the light still indicates that the air quality is poor, adjust the sensitivity sensor to 'Low sensitivity' or 'Average'; to make this change, check the instructions manual.
• If the light still indicates that the air quality is good, adjust the sensitivity sensor to 'Sensitive' or 'Average'; to make this change, check the instructions.

Various topics

Where can I dispose of my appliance at the end of its life span?

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

Where can I buy accessories, consumables or spare parts for my appliance?

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

What are the guarantee conditions of my appliance?

Find more detailed information in the Guarantee section of this website.

I've just opened my new appliance and I think there is a part missing. What should I do?

If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.

How does the 'Intense Pure Air' air purifier work?

The 'Intense Pure Air' air purifier allows you to breathe up to 99.95% pure air in your home, and as such to protect your health thanks to the four levels of filtration described below:
• Level 1: PRE-FILTER for dust, hair, fur
• Level 2: ACTIVE CARBON FILTER for volatile organic compounds (VOCs), odours / gases
• Level 3: HEPA FILTER for fine particles (PM2.5), pollens, acarids, animal allergens, mould, bacteria / viruses
• Level 4: NANOCAPTUR FILTER for formaldehyde

How to better use my productWhere to install the appliance?Place the purifier on a flat, stable surface in the room requiring treatment. To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance.Maintenance and cleaningHow often do you have to clean/replace the filters?• The pre-filter must be cleaned every 2 to 4 weeks.
• The active carbon filter must be replaced when the "Odor" indicator light lights up, otherwise at least every year.
• The HEPA filter must be replaced when the "HEPA" indicator light lights up, otherwise at least every 3 years.
• The NanoCaptur filter must be replaced according to the saturation indicator (refer to the colour chart on the filter); check the degree of saturation every 6 months.
Guidelines based on 8 hours of use per day at speed 2.Technical supportWhat should I do if my appliance is not working?After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centreWhat should I do if the power cord of my appliance is damaged?Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.The airflow is weaker than before.Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.A bad smell is coming out of the outlet.Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.The air output does not change automaticallyYour appliance is in manual mode, select the correct operational function.The colour of the air quality indicator does not change.There may be several reasons:
• A layer of dust is covering the senor lense; clean the sensor lense.
• If the light still indicates that the air quality is poor, adjust the sensitivity sensor to 'Low sensitivity' or 'Average'; to make this change, check the instructions manual.
• If the light still indicates that the air quality is good, adjust the sensitivity sensor to 'Sensitive' or 'Average'; to make this change, check the instructions.Various topicsWhere can I dispose of my appliance at the end of its life span?Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.Where can I buy accessories, consumables or spare parts for my appliance?Please go to the “Accessories” section of the website to easily find whatever you need for your product.What are the guarantee conditions of my appliance?Find more detailed information in the Guarantee section of this website.I've just opened my new appliance and I think there is a part missing. What should I do?If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.How does the 'Intense Pure Air' air purifier work?

Intense Pure Air

TEFAL Intense Pure Air

ULTIMATE PERFORMANCE AND LONG-LASTING EFFICIENCY

High performance of filtration

Intelligent filtration

Quiet night

Optimized air flow

Extremely silent

Easy filter maintenance