Tefal Easy Gliss

Easy Gliss N°1: the fastest dry iron in glide by TEFAL
  • Dry iron that features the N°1 soleplate in glideability*.

*in Europe, among the 200 top selling irons on a territory of 20 countries, 2010, test conducted by an independent laboratory

Easy Gliss, the fastest dry iron in glide by Tefal!

Discover Easy Gliss, the fastest dry iron in glide by Tefal.
Thanks to its Superglide Active soleplate, glide effortlessly with your iron on all types of fabric!
  • High precision, comes with a precision tip that allows you to reach difficult areas.
  • Convenient, it is light, stable and easy to handle.
  • Comfortable, Easycord system keeps the cord away from the board so it doesn't make more creases.
  • Practical and safe, an indicator light tells you if the iron is on or not.
  • Easy to store, wind the cord around the iron for an easy storage.
  • 1,200W power for a quick and efficient ironing.


  • Supergliss actif soleplate: N°1 in Glideability

  • Light and easy to use

  • Comfortable: Easy Cord System

  • Easy storage

Features - Comparison
Power 1.200  W
1.200  W
1.200  W
Soleplate Technology supergliss actif ,ceramic enamel  
n/a supergliss actif , ceramic enamel  
Glideability of soleplate *****  
Durability of soleplate / scratch resistance *****  
Precision Tip    
n/a n/a
Power cord length 1.8  m
2  m
1.8  m
Colours White/Purple  
n/a n/a

Instructions & Manual
Frequent questions
You must take precautions so that using your iron is risk-free.
Of capital importance… Never leave a hot iron unattended.
This is not only to avoid overheating of the iron or the surface on which it is placed but also to ensure that no-one gets burned. If safety is one of your main concerns, choose an iron that has an automatic cut-off function.
And never, never…
Never leave a hot iron within reach of children or pets who risk knocking it over and injuring themselves.
Like any electrical appliance, never put your iron in water.
Do not use an iron that has fallen down or has a damaged power cord. If you have the slightest doubt concerning the condition of your iron, contact the Service Centre.
Always unplug your iron before leaving it, cleaning it or filling it with water (unless it is a model that has a removable water tank). Regularly check the water level to ensure that there is always enough.
• The Durillium soleplate:
Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm.
If cleaning dirt off is an issue, use the stick which is made specifically for cleaning the Durillium soleplates.
• The stainless soleplate:
Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.
• The autoclean soleplate:
It is recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.
Warning: The use of iron cleaner will cause damage to your soleplate's autoclean coating.
3 possible causes:
• No mains supply: check that the mains plug is properly inserted or try plugging the iron into a different socket.
• Temperature control set too low: set the temperature control to a higher temperature.
• The automatic electronic cut-out* is active: move your iron.
* depending on model
All irons contain a thermostat light. It is normal for the thermostat to turn on and off. It indicates the thermostat is working and your soleplate is being maintained at the desired temperature. If the auto-off light blinks, you must disengage the auto-off function. This is done by gently shaking the iron which will allow the iron to reheat.
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself and take it to an approved repair centre.
Use the right temperatures on the thermostat for the right fabrics. A reason for sticking may be the use of starch. If you want to use starch, simply spray it on the reverse side of the garment, so that there is no contact between the soleplate and the starch. Clean the soleplate from rubber prints of fabric (Which always must be ironed on reverse side of the rubber prints).
The higher the wattage, the faster the iron will reach the desired temperature.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.