Tefal Steam Brush Access'steam user manuals

Reference : DR8086E1

Instructions & Manual
Frequent questions
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water that is free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.