TEFAL INTENSE PURE AIR II

INTENSE PURE AIR II
Features
Type of products Air Purifier  
Type of technology Filtration  
NanoCaptur Technology    
Ionization    
Automatic mode    
Night mode    
Air Quality Indicator    
Sensors Particles  
Control panel Electronical  
Filter change indicator    
Adjustable grid    
Ambient mood lighting    
Handle Integrated  

Instructions & Manual
Frequent questions
• The pre-filter must be cleaned every 2 to 4 weeks.
• The active carbon filter must be replaced when the "Odor" indicator light lights up, otherwise at least every year.
• The HEPA filter must be replaced when the "HEPA" indicator light lights up, otherwise at least every 3 years.
• The NanoCaptur filter must be replaced according to the saturation indicator (refer to the colour chart on the filter); check the degree of saturation every 6 months.
Guidelines based on 8 hours of use per day at speed 2.
Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.
Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.


The Intense Pure Air air purifier allows you to breathe up to 99.95% pure air in your home, and as such to protect your health thanks to the four levels of filtration described below:
• Level 1: PRE-FILTER for dust, hair, fur
• Level 2: ACTIVE CARBON FILTER for volatile organic compounds (VOCs), odours / gases
• Level 3: HEPA FILTER for fine particles (PM2.5), pollens, acarids, animal allergens, mould, bacteria / viruses
• Level 4: NANOCAPTUR FILTER for formaldehyde.