TEFAL INTENSE PURE AIR II XL

INTENSE PURE AIR II XL

Reference : PU6025G0

Features
Type of products Air Purifier  
Type of technology Filtration  
NanoCaptur Technology    
Pre-filter    
Silver Ion Pre-filter    
Active Carbon Filter    
HEPA Filter    
NanoCaptur Filter    
Ionization    
Heating function    
Automatic mode    
Night mode    
Baby Mode    
Air Quality Indicator    
Sensors Particles + Gas  
Room humidity level indicator    
Control panel Electronical  
Anti-freeze function    
LCD screen    
Weekly program    
Filter change indicator    
Adjustable grid    
Ambient mood lighting    
Wheels    
Handle Integrated  
Power cord rewinder    
Child lock    

Instructions & Manual
Frequent questions
• The pre-filter must be cleaned every two to four weeks.
• The active carbon filter must be cleaned when the "Odor" light is on and at least once per year.
• The HEPA filter must be replaced when the "HEPA" light is on and at least every three years.
• The NanoCaptur filter must be replaced as soon as the saturation indicator signals a change is necessary (check the colour chart on the filter), check the degrees of saturation every six months.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

The Intense Pure Air air purifier allows you to breathe up to 99.95% pure air in your home, and as such to protect your health thanks to the four levels of filtration described below:
• Level 1: PRE-FILTER for dust, hair, fur
• Level 2: ACTIVE CARBON FILTER for volatile organic compounds (VOCs), odours / gases
• Level 3: HEPA FILTER for fine particles (PM2.5), pollens, acarids, animal allergens, mould, bacteria / viruses
• Level 4: NANOCAPTUR FILTER for formaldehyde.
Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.
Your appliance is in manual mode, select the correct operational function.
Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.
There may be several reasons:
• A layer of dust is covering the senor lense; clean the sensor lense.
• If the light still indicates that the air quality is poor, adjust the sensitivity sensor to 'Low sensitivity' or 'Average'; to make this change, check the instructions manual.
• If the light still indicates that the air quality is good, adjust the sensitivity sensor to 'Sensitive' or 'Average'; to make this change, check the instructions.