TEFAL Instant Compact

Instant Compact Fast & Easy way to remove creases

Efficient steaming session in a compact design 

Tefal Instant Compact IS3340 garment steamer removes crease easily on all types of fabrics, but also refreshes and sanitizes all kind of garments.

Reference: IS3340M1

Essentials
  • Time saving & Precision

    Large metal steam head with pointed tip to efficiently remove creases from all fabrics

  • Time-saving benefits

    Spend less time on linen care: no need to go to the dry cleaner and no ironing board required. Fast heat up time means it's ready to use in just 60 seconds.

  • Ease of Use

    Simple on/off switch and 1 liter water tank with continuous refill that allows up to 30 minutes steaming, perfect for intensive steaming sessions and last minute touch ups. Removable base to facilitate steaming of long clothes, sofas, curtains and sheets without steam hose length constraint!

     

  • Refreshes & Sanitizes

    Power of 1500W and steam output of 30 g/min allow for a deep diffusion through the fibers to refresh and sanitize all kinds of garments

  •  Accessories

    2 accessories included: Fabric Brush to open up the weave of the fabric and allow for better steam penetration - ideal for removing creases from thick fabrics in particular, Glove for hand protection.

  • Long lasting performance

     Easy descaling solution through rinsing system

Features
Power 1500  W
Steam output 30  g/min
Heat-up time 60  s
Water tank capacity 1  L
Autonomy 30  min
Detachable base    
Colours Strawberry  
Instructions & Manual
Frequent questions
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.