TEFAL Purely & Simply

Purely & Simply A simply & purely way to use!
  • Fabrics and iron protected.

Reference : SV5030E0

Maxi steam iron just in simplicity!

Maxi steam iron equipped with a large remote water tank, it provides 4x more autonomy for longer ironing sessions. Its filter cartridge system purifies water for enhanced iron longevity and calc-free steam production.

The benefits of steam:
  • A 100g/min surface steam for easier ironing.
  • High capacity water tank for longer ironing sessions.
  • 1.2L water tank for long ironing sessions.
  • Easily refillable at any time during the session.
  • Once switched on, your product needs only 2 minutes to be ready and deliver steam.

Packed with smart features:

  • The most compact steam generator , easy to use and store.
  • Easy and quick access to the filter cartridge for effortless maintenance.
  • Easy gliding with ceramic soleplate.

 

Essentials

High steam ouput

100g/min surface steam for easier ironing.

Longer ironing

High capacity water tank for longer ironing sessions. Easily refillable at any time during the session.

Fast set-up

Once switched on, your product needs only 2 minutes to be ready and deliver steam

Easy maintenance

Easy and quick access to the filter cartridge for effortless maintenance

Features
High pressure boiler    
Vertical Steam    
Spray    
Setting of steam & temperature Manual setting  
Glideability of soleplate ***  
Durability of soleplate / scratch resistance ***  
Precision Tip    
Concentrated Steam boost at tip of soleplate    
Continuous steam diffusion Tip, side and heart  
Anti scale function Cartridge  
Scale collector    
Scale alert    
Comfort Handle No  
Silence technology    
Stable rest hill    
Water tank Fix  
Empty tank detector    
Continuous refilling    
Anti-drip No  
Auto-Off    
Eco Mode Yes  
Power cord rewinder    
Cord Storage Steam cord  
Lock-System    

Instructions & Manual
Frequent questions
Choose a board that is height-adjustable to adjust it to your body. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
• Tap water:
Your appliance has been designed to work with tap water. If the water in your area is very hard, mix 50% tap water and 50% distilled water.
In some regions near the sea, the salt content in your water may be high. In this case, use distilled water only.
• Softener:
There are several types of softeners and the water of most of them can be used in your appliance. However, some softeners, and particularly those that use chemical products such as salt, may cause white or brown stains, this is particularly the case with filter jugs. If you
encounter this type of problem, we recommend trying to use untreated tap water or bottled water. Once the water has been changed, several uses will be necessary to solve the problem. We recommend trying the steam function for the first time on an old item that can be thrown away in order to avoid damaging your clothes.
Remember:
Do not use rain water or water containing additives (such as starch or perfume) or water from clothes dryers, water from refrigerators, air conditioners etc,
This function allows you to iron fabrics in situ or on a hanger.
To do this, set the iron temperature button to the maximum position.
• Leave the item on a hanger and gently pull the fabric with one hand.
• Press the steam control button intermittently and move the iron from top to bottom.
As the steam produced is very hot, it softens the fibres and removes creases.
Note: Never use the vertical steam function on an item being worn by anyone.
To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model),
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.),
• Never clean your iron’s soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
The "anti-calc" cartridge is no longer functioning; replace it and then press the reset button for at least 3 seconds. Then press and hold the steam button for 2 or 3 minutes, holding the iron away from your clothes, to prime the pump.
• The Durillium soleplate:
Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron’s soleplate, use a damp sponge on the soleplate while it is still warm.
If cleaning dirt off is an issue, use the stick which is made specifically for cleaning the Durillium soleplates.
• The stainless soleplate:
Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.
• The autoclean soleplate:
It is recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.
Warning: The use of iron cleaner will cause damage to your soleplate’s autoclean coating.
You should replace the cartridge when the "anti-calc" indicator light flashes.
No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre
No. The pressure is at a relatively low level. Your appliance has two safety systems.
• A valve avoids any excess pressure and, in the event of malfunction of the appliance, allows the surplus steam to escape
• A thermal fuse to avoid any overheating.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Yes. However, if you notice that the steam cord is damaged, have it repaired by an authorised service partner.
• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an Approved Service Centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.
• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.
Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.
The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.
It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.
Do not use your appliance. To avoid any danger, have it replaced
by an approved repair centre.
• You have just refilled the reservoir and changed the "anti-calc" cartridge or you have just begun to use the device. ==> Press and hold the steam button for 2 or 3 minutes, keeping the iron away from your clothing to prime the pump.
• The "anti-calc" cartridge is not installed or incorrectly installed in the appliance. ==> Make sure that the "anti-calc" cartridge is installed and fully engaged in its compartment.
• Steam cannot be created at the temperature you have selected. ==> Adjust the thermostat to the steam zone (••• or to MAX).
• The water tank is empty. ==> Fill the tank.
• You are using the steam function for the first time or you have not used the steam function in some time. ==> Press the steam button on your ironing board until the iron produces steam.
• The setting is not correct (1 point/2 points) and the soleplate is not hot enough to produce steam. ==> Adjust the iron to 3 (••• or MAX) and wait for the iron thermostat light to deactivate before using the steam button again.
The appliance is faulty; stop using your maxi steam iron and contact an Approved Service Centre.
You did not press the reset button.
Press it until the light stops flashing, then press and hold the steam button for 2 or 3 minutes, holding the iron away from your clothes, to prime the pump.
If the problem persists contact an Approved Service Centre.
Your ironing board is saturated with water because it is not suited for use with an iron equipped with an extra large reservoir.
We recommend using an ironing board made of steel mesh or with holes.