Steam N Press 2 in 1Efficiency & convenience at hand
Thanks to its heated soleplate and its 3 adjustable temperature settings to adapt to any kind of fabric, get the benefits of an iron with the convenience of a handheld steamer.
This 2 in 1 handheld steamer will be the ideal tool when you are travelling or when you need to do touch ups on your daily outfit. Thanks to its heated soleplate and its 3 adjustable temperature settings to adapt to any kind of fabric. It can be used either on an ironing board or in vertical position.
It also features a removable water tank of 70ml that offers up to 15min steaming and also a travel bag to bring the product with you all around the world !
Essentials
2-in-1 steambrush & iron
Thanks to its heated soleplate and its 3 adjustable temperature settings that adapt to any kind of fabric, get the benefits of an iron with the convenience of a handheld steamer.
Adapted to all fabrics
The soleplate's 3 adjustable temperature settings adapt to all kinds of fabric, even the most delicate.
Effective wrinkle removal
The burst of steam that is available at maximum temperature setting will allow you to be even more efficient on your touch ups
Ease of use
Removable water tank of 70ml that allows up to 15 minutes autonomy
Refreshes & Sanitizes
Power of 800W and heated soleplate allow to refresh and sanitize all kind of garments, from the thickest to the most delicates
Accessories
4 accessories included:
Fabric brush that open the weaves of the fabric for better steam penetration, ideal to remove creases on thick fabrics
Lint pad to remove hair, lint and animal fur for a great finish
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The water level in the tank is too low ==> Unplug the appliance and fill the tank. The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump. The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product. The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I". The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water. Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
